Shure WH30TQG Headset microphone
The Shure Model WH30 is a light yet rugged headset microphone. Designed for vocalists and instrument-playing vocalists, the WH30 utilizes a high quality electret-condenser cartridge suitable for all applications where mobility, comfort, low microphone-visibility, and high sound quality are required. Because of its cardioid (unidirectional) pickup pattern, the WH30 provides isolation from extraneous sound sources and high gain-before-feedback.
The wireframe and gooseneck adjust to any head size and shape. An integrated elastic headband comfortably pads and secures the headset. The WH30 is supplied with two snap-on windscreens, clothing clip, storage bag and cable-management device.
The WH30 is a perfect fit for those who desire total freedom of movement and need the high-quality audio of a condenser microphone
Il microfono SHURE WH30, cardioide a condensatore, con robusto supporto attorno alla testa, è stato realizzato per cantanti e musicisti che richiedono una completa mobilità e, grazie alla capsula a condensatore electred, una elevata qualità del segnale. Il WH30 ha una risposta in frequenza modellata per ottimizzare la chiarezza della voce. Leggero ed ergonomico è dotato di un collo d'oca flessibile che facilita il posizionamento ottimale della capsula microfonica ed uno shock mount che isola e riduce il rumore dovuto alle vibrazioni. Una fascia elastica integrata al frame di acciaio tiene in posizione il supporto del microfono in modo sicuro e confortevole. Resistente all'umidità ed alle alte temperature il suo modello polare cardioide fornisce il massimo guadagno prima del feedback e riduce la ripresa delle sorgenti sonore indesiderate. In grado di sopportare pressioni sonore elevate, il WH30 ha in dotazione due antivento, una clip per gli abiti ed una borsetta per il trasporto.
- Tailored frequency response enhances vocal range
- Flexible gooseneck for optimum microphone placement
- Isolation shock mount reduces vibration noise
- Low-profile, lightweight design
- Cardioid polar pattern provides maximum gain before feedback
- High sound pressure level capability
- Secure snap-on windscreen reduces "p" pops
| Type | Condenser, electret bias |
| Frequency Response | 40 to 20,000 Hz |
| Polar Pattern | Unidirectional (cardioid) |
| Output Impedance (at 1kHz) | 2400 Ω |
| Output Level (at 1 kHz; 0 dB = 1 V/Pascal) | –55.5 dB (1.7 mV) |
| Signal to noise ratio (ref. A-weighted noise) | 63.0 dB at 94 dB SPL (IEC 651) |
| Output Clipping Level (at 1000 Hz) | –22 dBV (0.08 V |
| Maximum SPL | 130 dB |
| Dynamic Range (max. SPL to A-weighted noise level) | 99 dB |
| Output Noise (equivalent SPL) | 31 dB (typical, A-weighted) |
| Recommended Operating Voltage | 5 VDC (pin 2 to pins 3 and 4) |
| Polarity | Positive sound pressure on diaphragm produces positive voltage on pins 3 and 4 relative to pin 1 (ground) on the mini TA4F connector. |
| Environmental Conditions | Operating Temperature –7° to 49° C (20° to 120° F) Storage Temperature –29° to 74° C (–20° to 165° F) Humidity: 0 to 95% (operating or storage |
| Cable | 1.2 m (4 ft.) two-conductor, shielded |
| Cable Connector | mini TA4F |
| Net Weight | Headset: 65 g (2.3 oz) |